Teledyne Technologies Incorporated, together with its subsidiaries, provides enabling technologies for industrial growth markets in the United States and internationally. Its Digital Imaging segment provides visible spectrum sensors and digital cameras; and infrared, ultraviolet, visible, and X-ray spectra; as well as micro electromechanical systems and semiconductors, including analog-to-digital and digital-to-analog converters. This segment also offers cooled and uncooled infrared or thermal products, including sensors, camera cores, and camera systems; high-resolution, low-dose X-ray sensors, high-power microwave, and high-energy X-ray subsystems; and instruments for the measurement of physical properties and maritime products; as well as develops and manufactures multi-spectrum electro-optic/infrared imaging systems and associated products, such as lasers, optics, and radars, CBRNE (Chemical, Biological, Radiological, Nuclear and Explosive detectors), and unmanned air and ground systems. The company's Instrumentation segment offers monitoring, control, and electronic test and measurement equipment; and power and communications connectivity devices for distributed instrumentation systems and sensor networks. The company's Aerospace and Defense Electronics segment provides electronic components and subsystems, data acquisition and communications components and equipment, harsh environment interconnects, general aviation batteries, and other components; and onboard avionics systems and ground-based applications, aircraft data and connectivity solutions, hardware systems, and software applications. Its Engineered Systems segment offers systems engineering and integration, technology development, and manufacturing solutions for defense, space, environmental, and energy applications; and designs and manufactures electrochemical energy systems and electronics for military applications. The company was founded in 1960 and is headquartered in Thousand Oaks, California.

Curtiss-Wright Corporation, together with its subsidiaries, provides engineered products, solutions, and services mainly to aerospace and defense, commercial power, process, and industrial markets worldwide. It operates through three segments: Aerospace & Industrial, Defense Electronics, and Naval & Power. The Aerospace & Industrial segment offers industrial and specialty vehicle products, such as power management electronics, traction inverters, transmission shifters, and control systems; sensors, controls, and electro-mechanical actuation components used on commercial and military aircraft; and surface technology services including shot peening, laser peening, and engineered coatings. The Defense Electronics segment provides commercial off-the-shelf embedded computing board-level modules and processing equipment, data acquisition and flight test instrumentation equipment, integrated subsystems, instrumentation and control systems, tactical communications solutions; and electronic stabilization products, and weapons handling systems; avionics and electronics; flight test equipment; and aircraft data management solutions. The Naval & Power segment offers main coolant pumps, power-dense compact motors, generators, steam turbines, valves, and secondary propulsion systems; energy absorbers, retractable hook cable systems, net-stanchion systems and mobile systems to support fixed land-based arresting systems; hardware, valves, fastening systems, specialized containment doors, airlock hatches, and spent fuel management products; reactor coolant pumps and control rod drive mechanisms for commercial nuclear power plants, as well as various nuclear reactor technologies. This segment furnishes severe-service valve technologies and services, heat exchanger repair, and piping test and isolation products, and offers ship repair and maintenance for the U.S. navy. Curtiss-Wright Corporation was incorporated in 1929 and is headquartered in Davidson, North Carolina.

ITT Inc., together with its subsidiaries, manufactures and sells engineered critical components and customized technology solutions for the transportation, industrial, and energy markets in the United States and internationally. The Motion Technologies segment manufactures brake pads, shims, shock absorbers, and energy absorption components; and sealing technologies primarily for the transportation industry, including passenger cars, trucks, light- and heavy-duty commercial and military vehicles, buses, and trains. This segment sells its products under ITT Friction Technologies, KONI, Wolverine Advanced Materials, Axtone, Novitek, and GALT. brand names. The Industrial Process segment provides industrial pumps, valves, and plant optimization and remote monitoring systems and services; and aftermarket solutions, such as replacement parts and services. It serves various customers in industries, such as chemical, energy, mining, and other industrial process markets. This segment sells its products under Goulds Pumps, Bornemann, Engineered Valves, PRO Services, C'treat, i-ALERT, Rheinhütte Pumpen, and Habonim brand names. The Connect & Control Technologies segment designs and manufactures a range of engineered connectors and specialized products for critical applications supporting various markets, including aerospace and defense, industrial, transportation, medical, and energy. This segment provides connector products, such as circular, rectangular, radio frequency, fiber optic, D-sub miniature, micro-miniature, and cable assemblies; and control products consist of highly engineered actuation, flow control, energy absorption, environmental control, and composite component solutions for the aerospace, defense, and industrial markets under Cannon, VEAM, BIW Connector Systems, Aerospace Controls, Enidine, Compact Automation, Neo-Dyn Process Controls, Conoflow, and Micro-Mode brand names. The company was incorporated in 1920 and is headquartered in Stamford, Connecticut.

Carpenter Technology Corporation engages in the manufacture, fabrication, and distribution of specialty metals in the United States, Europe, the Asia Pacific, Mexico, Canada, and internationally. It operates in two segments, Specialty Alloys Operations and Performance Engineered Products. The company offers specialty alloys, including titanium alloys, powder metals, stainless steels, alloy steels, and tool steels, as well as additives, and metal powders and parts. It serves to aerospace, defense, medical, transportation, energy, industrial, and consumer markets. The company was founded in 1889 and is headquartered in Philadelphia, Pennsylvania.

TTM Technologies, Inc., together with its subsidiaries, manufactures and sells mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and printed circuit boards (PCB) worldwide. The company operates in two segments, PCB and RF&S Components. It offers range of engineered systems, RF and microwave assemblies, HDI PCBs, flexible PCBs, rigid-flex PCBs, custom assemblies and system integration, IC substrates, passive RF components, advanced ceramic RF components, hi-reliability multi-chip modules, beamforming and switching networks, PCB products, RF components, and backplane/custom assembly solutions, including conventional PCBs. It also provides advanced ceramic RF components including standard and etched thick-film ceramic substrates; and hi-reliability multi-chip modules. In addition, the company offers radar systems including maritime surveillance and weather avoidance radar systems, surveillance products, communication systems, RF assembly and test services, and passive RF components. Further, the company provides custom designed application specific integrated circuits, high density interconnect, IC substrates, flexible and rigid flex PCBs, and custom assemblies including backplane and mid-plane assemblies, flexible and rigid-flex assemblies, and RF assemblies, as well as conventional PCBs, such as single-sided, double-sided, and multi-layer boards. Additionally, it offers quick turnaround services, which includes prototype production and ramp-to-volume production, and thermal management. The company serves original equipment manufacturers and electronic manufacturing services providers, original design manufacturers, distributors, and government agencies; and aerospace and defense, data center computing, automotive, medical, industrial, and instrumentation, as well as networking applications. TTM Technologies, Inc. was incorporated in 1978 and is headquartered in Santa Ana, California.

Standex International Corporation, together with subsidiaries, engages in the manufacture and sale of various products and services for commercial and industrial markets in the United States and internationally. It operates through five segments: Electronics, Engraving, Scientific, Engineering Technologies, and Specialty Solutions. The Electronics segment offers reed relays, fluid level, proximity, motion, flow, HVAC condensate, and custom electronics sensors; and custom wound transformers and inductors for low and high frequency, current sense technology, advanced planar transformer technology, value added assembly, and mechanical packaging applications under the Standex Electronics, Renco, and Agile Magnetics. The Engraving segment provides mold texturizing, slush molding tools, roll engraving, hygiene product tooling, and low observation vents, as well as project management and design services for stealth aircraft; and process machinery for various industries under the Piazza Rosa, World Client Services, Tenibac-Graphion, GS Engineering, and Innovent brand names. The Scientific segment offers temperature-controlled equipment for the medical, scientific, pharmaceutical, biotech, and industrial markets under the American BioTech Supply, Lab Research Products, Corepoint, Cryosafe, CryoGuard, and Scientific brands. The Engineering Technologies segment offers net and near net formed single-source customized solutions that are used in the manufacture of engineered components for the aviation, aerospace, defense, energy, industrial, medical, marine, oil and gas, and manned and unmanned space markets under the Spincraft brand. The Specialty Solutions segment manufactures and sells refrigerated, heated, and dry merchandizing display cases; and single and double acting telescopic, and piston rod hydraulic cylinders under the Federal and Custom Hoist brands. The company was founded in 1955 and is headquartered in Salem, New Hampshire.

Ducommun Incorporated provides engineering and manufacturing services for products and applications used primarily in the aerospace and defense, industrial, medical, and other industries in the United States. The company operates through two segments, Electronic Systems and Structural Systems. The Electronic Systems segment provides cable assemblies and interconnect systems; printed circuit board assemblies; electronic, electromechanical, and mechanical components and assemblies, as well as lightning diversion systems; and radar enclosures, aircraft avionics racks, shipboard communications and control enclosures, printed circuit board assemblies, cable assemblies, wire harnesses, interconnect systems, lightning diversion strips, surge suppressors, conformal shields, and other assemblies. The segment also supplies engineered products, including illuminated pushbutton switches and panels for aviation and test systems; microwave and millimeter switches and filters for radio frequency systems and test instrumentation; and motors and resolvers for motion control. In addition, this segment provides engineering expertise for aerospace system design, development, integration, and testing. The Structural Systems segment designs, engineers, and manufactures contoured aluminum, titanium, and Inconel aero structure components; structural assembly products, such as winglets, engine components, and fuselage structural panels; aerodynamic systems; and metal and composite bonded structures and assemblies comprising aircraft wing spoilers, large fuselage skins, rotor blades on rotary-wing aircraft and components, flight control surfaces, engine components, ammunition handling systems, and magnetic seals. It serves commercial aircraft, military fixed-wing aircraft, military and commercial rotary-wing aircraft, and space programs, as well as industrial, medical, and other end-use markets. The company was founded in 1849 and is headquartered in Costa Mesa, California.

Kaman Corporation, together with its subsidiaries, operates in the aerospace, defense, medical, and industrial markets. The company operates through three segments: Engineered Products, Precision Products, and Structures. The Engineered Products segment produces and markets aircraft bearings and components; super precision; miniature ball bearings; and spring energized seals, springs, and contacts, as well as wheels, brakes, and related hydraulic components for helicopters and fixed-wing, and UAV aircraft. The Precision Products segment provides safe and arming solutions for missile and bomb systems for the U.S. and allied militaries; undertakes subcontract helicopter works; restores, modifies, and supports its SH-2G Super Seasprite maritime helicopters; and supports heavy lift K-MAX manned helicopter, and the KARGO UAV unmanned aerial system. The Structures segment offers metallic and composite aero structures for commercial, military, and general aviation fixed and rotary wing aircrafts; and medical imaging solutions. The company operates in North America, Europe, the Middle East, Asia, Oceania, and internationally. Kaman Corporation was incorporated in 1945 and is headquartered in Bloomfield, Connecticut.