Crane Company, together with its subsidiaries, manufactures and sells engineered industrial products in the United States, Canada, the United Kingdom, Continental Europe, and internationally. The company operates in three segments: Aerospace & Electronics, Process Flow Technologies, and Engineered Materials. The Aerospace & Electronics segment supplies critical components and systems, including original equipment and aftermarket parts for commercial aerospace, as well as the military aerospace, defense, and space markets. This segment also offers pressure sensors for aircraft engine control, aircraft braking systems for commercial aircraft and fighter jets, power conversion solutions for spacecraft, and lubrication systems. The Process Flow Technologies segment provides engineered fluid handling equipment for mission-critical applications. It offers process valves and related products, such as lined pipe, fittings and hoses, air-operated diaphragm and peristaltic pumps, instrumentation and sampling systems, valve positioning and control systems, and valve diagnostic and calibration systems; commercial valves; and pumps and systems. The Engineered Materials segment manufactures fiberglass-reinforced plastic panels and coils for use in the manufacturing of recreational vehicles, as well as in commercial and industrial building applications. This segment sells directly to RV, trailer, and truck manufacturers, as well as through distributors and retailers. The company provides its products and solutions to end markets, including commercial and military aerospace, defense, and space; chemical and pharmaceutical production; water and wastewater; non-residential and municipal construction; energy; and other general industrial and consumer-related applications. The company was formerly known as Crane Holdings, Co. Crane Company was founded in 1855 and is based in Stamford, Connecticut.

Terex Corporation manufactures and sells aerial work platforms and materials processing machinery worldwide. It operates in two segments, Materials Processing (MP) and Aerial Work Platforms (AWP). The MP segment designs, manufactures, services, and markets materials processing and specialty equipment, includes crushers, washing systems, screens, trommels, apron feeders, material handlers, pick and carry cranes, rough terrain cranes, tower cranes, wood processing, biomass and recycling equipment, concrete mixer trucks and concrete pavers, conveyors, and related components and replacement parts under the Terex, Powerscreen, Fuchs, EvoQuip, Canica, Cedarapids, CBI, Simplicity, Franna, Terex Ecotec, Finlay, ProAll, ZenRobotics, Terex Washing Systems, Terex MPS, Terex Jaques, Terex Advance, ProStack, Terex Bid-Well, MDS, and Terex Recycling Systems brands. Its products are used in construction, infrastructure, and recycling projects; quarrying and mining, and material handling applications; maintenance applications to lift equipment or material; and landscaping and biomass production industries. The AWP segment designs, manufactures, services, and markets aerial work platform equipment, utility equipment, and telehandlers under the Terex and Genie brands. Its products include portable material lifts, portable aerial work platforms, trailer-mounted articulating booms, self-propelled articulating and telescopic booms, and scissor lifts, as well as related components and replacement parts for construction and maintenance of industrial, commercial, institutional, and residential buildings and facilities, transmission and distribution lines, construction and foundation drilling applications, and other commercial operations, as well as in tree trimming and various infrastructure projects. The company offers financing solutions to assist customers in the rental, leasing, and acquisition of its products. Terex Corporation was founded in 1933 and is based in Norwalk, Connecticut.

Enerpac Tool Group Corp. manufactures and sells a range of industrial products and solutions in the United States, the United Kingdom, Germany, Australia, Canada, China, Saudi Arabia, Brazil, France, and internationally. It operates through Industrial Tools & Services and Other segments. The Industrial Tools & Services segment designs, manufactures, and distributes branded hydraulic and mechanical tools; and provides services and tool rentals to the infrastructure, industrial maintenance, repair and operations, oil and gas, mining, alternative and renewable energy, civil construction, and other markets. It also offers branded tools, cylinders, pumps, hydraulic torque wrenches, highly engineered heavy lifting technology solutions, and other tools; and maintenance and manpower services; high-force hydraulic and mechanical tools, including cylinders, pumps, valves, bolt tensioners, specialty tools and other miscellaneous products. This segment markets its branded tools and services primarily under the ENERPAC, HYDRATIGHT, LARZEP & DESIGN, and SIMPLEX brands. The Other segment develops a full-service biomedical textile product. The company was formerly known as Actuant Corporation and changed its name to Enerpac Tool Group Corp. in January 2020. Enerpac Tool Group Corp. was incorporated in 1910 and is headquartered in Menomonee Falls, Wisconsin.

Columbus McKinnon Corporation designs, manufactures, and markets motion solutions for moving, lifting, positioning, and securing materials worldwide. It offers manual, battery, electric, and air hoists; steel, rack, and pinion jacks; winches, hydraulic jacks and tools, trolleys and its clamps, and lifting tables; skates and heavy load moving systems; material handling equipment; mobile, workplace, and jib cranes; crane components and kits; and below-the-hook lifting devices, lifting slings, and lashing systems. The company also provides linear motion products, elevator and mining drives, brakes, radio controls, collision avoidance systems, regenerative drives, AC and DC drive and motor control systems, DC motor and magnet control systems, and conductor bar systems; and underfloor lifting systems, lifting jacks, roof working platforms, hybrid lifting systems, turntables, bogie axle exchange and lifting systems, bogie lift and turn devices, and workshop equipment. In addition, it offers fabric and modular belt, and sanitary, stainless steel conveyors; pallet systems; parts and belts; rotary unions and swivel joints; check valves; accumulation and transfer tables, motion control systems, and steel and flexible chains; hooks, shackles, textile slings, clamps, and load binders; actuators and rotary unions; and push button pendant stations, collision avoidance, and power delivery subsystems. It serves EV production and aerospace, energy and utilities, process industries, industrial automation, construction and infrastructure, food and beverage, entertainment, life sciences, consumer packaged goods, and e-commerce/supply chain/warehousing markets. It offers its products to end users directly, and through distributors, independent crane builders, material handling specialists and integrators, original equipment manufacturers, government agencies, and engineering procurement and construction firms. The company was founded in 1875 and is based in Charlotte, North Carolina.

Matrix Service Company provides engineering, fabrication, construction, and maintenance services to support critical energy infrastructure and industrial markets in the United States, Canada, and internationally. The company's Storage and Terminal Solutions segment undertakes work related to aboveground crude oil and refined product storage tanks and terminals; engineering, procurement, fabrication, and construction services related to cryogenic, specialty tanks, and terminals for LNG, NGLs, hydrogen, ammonia, propane, butane, liquid nitrogen/liquid oxygen, and liquid petroleum; and provides plant work, truck and rail loading/offloading facilities, and marine structures, as well as storage tank and terminal maintenance and repair. This segment offers engineered specialty tank products, including geodesic domes, aluminum internal floating roofs, floating suction and skimmer systems, roof drain systems, and floating roof seals. Its Utility and Power Infrastructure segment offers power delivery services, including construction of new substations, upgrades of existing substations, transmission and distribution line installations, and upgrades and maintenance, and emergency and storm restoration services. This segment provides engineering, fabrication, and construction services for LNG utility peak shaving facilities; and construction and maintenance services to power generation facilities, including natural gas fired facilities. The company's Process and Industrial Facilities segment offers plant maintenance and turnarounds for refining and processing of crude oil, fractionating, and marketing of natural gas and natural gas liquids; engineering, procurement, fabrication, and construction for refinery upgrades and retrofits for hydrogen processing, production, loading, and distribution facilities; and constructs thermal vacuum test chambers for aerospace and defense, and other industries. The company was founded in 1984 and is headquartered in Tulsa, Oklahoma.

Mayville Engineering Company, Inc., together with its subsidiaries, engages in the production, design, prototyping and tooling, fabrication, aluminum extrusion, coating, and assembling of aftermarket components in the United States. It also supplies engineered components to original equipment manufacturers. The company serves heavy and medium duty commercial vehicles, construction and access equipment, powersports, agriculture, military, and other end markets. Mayville Engineering Company, Inc. was founded in 1945 and is headquartered in Milwaukee, Wisconsin.

Manitex International, Inc. provides engineered lifting solutions in the United States, Italy, Canada, Chile, France, and internationally. The company designs, manufactures, and distributes products that are used in various industries. It also offers boom trucks, truck cranes, and sign cranes products primarily for use in industrial projects, energy exploration, and infrastructure development comprising roads, bridges, and commercial construction; and truck-mounted aerial platforms. In addition, the company manufactures and sells rough terrain cranes and material handling products; and truck mounted hydraulic knuckle boom cranes; and rents light and heavy-duty commercial construction equipments. It also sells its products through dealers and rental distribution channel. The company was formerly known as Veri-Tek International, Corp. and changed its name to Manitex International, Inc. in May 2008. Manitex International, Inc. was founded in 1993 and is headquartered in Bridgeview, Illinois.

Twin Disc, Incorporated engages in the design, manufacture, and sale of marine and heavy duty off-highway power transmission equipment in the United States, the Netherlands, China, Australia, Italy, and internationally. The company operates in two segments, Manufacturing and Distribution. Its principal products include marine transmissions, azimuth drives, surface drives, propellers, and boat management systems, as well as power-shift transmissions, hydraulic torque converters, power take-offs, industrial clutches, and controls systems. The company also provides third-party manufactured products. It sells its products through a direct sales force and distributor network to customers primarily in the pleasure craft, commercial marine, patrol, and military marine markets, as well as in the energy and natural resources, government, agriculture, recycling, construction, oil and gas, and industrial markets. The company was incorporated in 1918 and is headquartered in Milwaukee, Wisconsin.