Parker-Hannifin Corporation manufactures and sells motion and control technologies and systems for various mobile, industrial, and aerospace markets worldwide. The company operates through two segments: Diversified Industrial and Aerospace Systems. The Diversified Industrial segment offers various motion-control systems and components, such as active and passive vibration control, high purity sealing, coatings, high temperature sealing, cryogenic valves and fittings, HVAC/R controls and monitoring, elastomeric, fabric reinforced, metal, precision cut seals, hydrogen and natural gas filters, electric and hydraulic pumps and motors, industrial air, gas filtration, electric and hydraulic valves, miniature pumps and valves, electromagnetic interface shielding, pneumatic actuators, regulators and valves, electromechanical and hydraulic actuators, power take offs, electronics, drives and controllers, process filtration solutions, engine filtration solutions, rubber to substrate adhesives, fluid condition monitoring, sensors and diagnostics, fluid conveyance hose and tubing, structural adhesives, high pressure connectors, fittings, valves and regulators, thermal management, high purity fittings. The Aerospace Systems segment offers products for use in commercial and defense airframe and engine programs, such as avionics, electric & hydraulic braking systems, electric power, electromechanical actuators, engine exhaust systems and components, fire detection and suppression, flight control systems, fluid conveyance, fuel systems & components, fuel tank inerting systems, hydraulic pumps & motors, hydraulic valves & actuators, pneumatics, seals, sensors, and thermal management products. The company sells its products to original equipment manufacturers, distributors, direct-sales employees, and sales representatives. Parker-Hannifin Corporation was founded in 1917 and is headquartered in Cleveland, Ohio.

Emerson Electric Co., a technology and software company, provides various solutions in the Americas, Asia, the Middle East, Africa, and Europe. It operates through seven segments: Final Control, Measurement & Analytical, Discrete Automation, Safety & Productivity, Control Systems & Software, Test & Measurement, and AspenTech. The Final Control segment provides control, isolation, shutoff, pressure relief, and pressure safety valves, actuators, and regulators for process and hybrid industries. The Measurement & Analytical segment offers intelligent instrumentation measuring the physical properties of liquids or gases, such as pressure, temperature, level, flow, acoustics, corrosion, pH, conductivity, water quality, toxic gases, and flame. The Discrete Automation segment offers solenoid and pneumatic valves, valve position indicators, pneumatic cylinders, actuators, air preparation equipment, pressure and temperature switches, electric linear motion solutions, programmable automation control systems, electrical distribution equipment, and materials joining solutions. The Safety & Productivity segment offers tools for professionals and homeowners; pipe-working tools, including pipe wrenches, pipe cutters, pipe threading and roll grooving equipment, battery hydraulic tools; electrical tools; and other professional tools. The Control Systems & Software segment provides control systems, safety instrumented systems, SCADA systems, application software, digital twins, asset performance management, and cybersecurity. The Test & Measurement provides software-connected automated test and measurement systems. The AspenTech segment provides asset optimization software that enables industrial manufacturers to design, operate, and maintain operations for enhancing performance through a combination of decades of modeling, simulation, and optimization capabilities. The company was incorporated in 1890 and is based in Saint Louis, Missouri.

Ingersoll Rand Inc. provides various mission-critical air, gas, liquid, and solid flow creation technologies services and solutions worldwide. It operates through two segments, Industrial Technologies and Services, and Precision and Science Technologies. The Industrial Technologies and Services segment designs, manufactures, markets, and services air and gas compression, vacuum, and blower products; fluid transfer equipment and loading systems; and power tools and lifting equipment, including associated aftermarket parts, consumables, air treatment equipment, controls, other accessories, and services under the under the Ingersoll Rand, Gardner Denver, Nash, CompAir, Elmo Rietschle brands, etc. The Precision and Science Technologies segment designs, manufactures, and markets diaphragm, piston, water-powered, peristaltic, gear, vane, progressive cavity, and syringe pumps; and gas boosters, hydrogen compression systems, automated liquid handling systems, odorant injection systems, controls, software, and other related components and accessories for liquid and gas dosing, transfer, dispensing, compression, sampling, pressure management, and flow control in specialized or critical applications under the Air Dimensions, Albin, ARO, Dosatron, Haskel, Ingersoll Rand, LMI, Maximus, Milton Roy, MP, Oberdorfer, Seepex, Thomas, Welch, Williams, YZ, and Zinnser Analytic brand names. This segment's products are used in medical, life sciences, industrial manufacturing, water and wastewater, chemical processing, energy, food and beverage, agriculture, and other markets. It sells through an integrated network of direct sales representatives and independent distributors. The company was formerly known as Gardner Denver Holdings, Inc. and changed its name to Ingersoll Rand Inc. in March 2020. Ingersoll Rand Inc. was founded in 1859 and is headquartered in Davidson, North Carolina.

HEICO Corporation, through its subsidiaries, designs, manufactures, and sells aerospace, defense, and electronic related products and services in the United States and internationally. Its Flight Support Group segment provides jet engine and aircraft component replacement parts; thermal insulation blankets and parts; renewable/reusable insulation systems; and specialty components. This segment also distributes hydraulic, pneumatic, structural, interconnect, mechanical, and electro-mechanical components for the commercial, regional, and general aviation markets; and offers repair and overhaul services for jet engine and aircraft component parts, avionics, instruments, composites, and flight surfaces of commercial aircraft, as well as for avionics and navigation systems, and other instruments utilized on military aircraft. The company's Electronic Technologies Group segment provides electro-optical infrared simulation and test equipment; electro-optical laser products; electro-optical, microwave, and other power equipment; electromagnetic and radio frequency (RF) interference shielding and suppression filters; power conversion and interface; interconnection devices; and underwater locator beacons and emergency locator transmission beacons. This segment also offers traveling wave tube amplifiers and microwave power modules; memory products and specialty semiconductors; harsh environment connectivity products and custom molded cable assemblies; RF and microwave products; communications and electronic intercept receivers and tuners; self-sealing auxiliary fuel systems; active antenna systems and airborne antennas; nuclear radiation detectors; silicone products; power amplifiers; ceramic-to-metal feedthroughs and connectors; technical surveillance countermeasures equipment; RF receivers and sources; embedded computing solutions; test sockets and adapters; and radiation assurance services. The company was incorporated in 1957 and is headquartered in Hollywood, Florida.

ITT Inc., together with its subsidiaries, manufactures and sells engineered critical components and customized technology solutions for the transportation, industrial, and energy markets in the United States and internationally. The Motion Technologies segment manufactures brake pads, shims, shock absorbers, and energy absorption components; and sealing technologies primarily for the transportation industry, including passenger cars, trucks, light- and heavy-duty commercial and military vehicles, buses, and trains. This segment sells its products under ITT Friction Technologies, KONI, Wolverine Advanced Materials, Axtone, Novitek, and GALT. brand names. The Industrial Process segment provides industrial pumps, valves, and plant optimization and remote monitoring systems and services; and aftermarket solutions, such as replacement parts and services. It serves various customers in industries, such as chemical, energy, mining, and other industrial process markets. This segment sells its products under Goulds Pumps, Bornemann, Engineered Valves, PRO Services, C'treat, i-ALERT, Rheinhütte Pumpen, and Habonim brand names. The Connect & Control Technologies segment designs and manufactures a range of engineered connectors and specialized products for critical applications supporting various markets, including aerospace and defense, industrial, transportation, medical, and energy. This segment provides connector products, such as circular, rectangular, radio frequency, fiber optic, D-sub miniature, micro-miniature, and cable assemblies; and control products consist of highly engineered actuation, flow control, energy absorption, environmental control, and composite component solutions for the aerospace, defense, and industrial markets under Cannon, VEAM, BIW Connector Systems, Aerospace Controls, Enidine, Compact Automation, Neo-Dyn Process Controls, Conoflow, and Micro-Mode brand names. The company was incorporated in 1920 and is headquartered in Stamford, Connecticut.

Applied Industrial Technologies, Inc. distributes industrial motion, power, control, and automation technology solutions in the United States, Canada, Mexico, Australia, New Zealand, Singapore, and Costa Rica. It operates in two segments, Service Center Based Distribution, and Engineered Solutions. The company distributes bearings, power transmission products, engineered fluid power components and systems, specialty flow control solutions, advanced automation products, industrial rubber products, linear motion components, automation solutions, tools, safety products, oilfield supplies, and other industrial and maintenance supplies; and motors, belting, drives, couplings, pumps, hydraulic and pneumatic components, filtration supplies, valves, fittings, process instrumentation, actuators, and hoses, filtration supplies, as well as other related supplies for general operational needs of customers' machinery and equipment. It also operates fabricated rubber shops and service field crews that install, modify, and repair conveyor belts and rubber linings, as well as offer hose assemblies. In addition, the company provides technical support services; engages in the distribution of fluid power and industrial flow control products; advanced automation solutions, including machine vision, robotics, motion control, and smart technologies. It distributes industrial products through a network of service centers. The company serves various industries, including agriculture and food processing, cement, chemicals and petrochemicals, fabricated metals, forest products, industrial machinery and equipment, life sciences, mining, oil and gas, primary metals, technology, transportation, and utilities, as well as government entities. The company was formerly known as Bearings, Inc. and changed its to name to Applied Industrial Technologies, Inc. in 1997. The company was founded in 1923 and is headquartered in Cleveland, Ohio.

SPX Technologies, Inc. supplies infrastructure equipment serving the heating, ventilation, and cooling (HVAC); and detection and measurement markets worldwide. The company operates in two segments, HVAC and Detection and Measurement. The HVAC segment engineers, designs, manufactures, installs, and services package and process cooling products and engineered air movement solutions for the HVAC industrial and power generation markets, as well as boilers, heating, and ventilation products for the residential and commercial markets. It offers its products under the Marley, Recold, SGS, Cincinnati Fan, TAMCO, Ingénia, Berko, Qmark, Fahrenheat, Leading Edge, Patterson-Kelley, Weil-McLain, Williamson-Thermoflo, INDEECO, Heatrex, AccuTherm, Brasch, Spectrum, BannerDay PipeHeating, and Solar Products brands. The Detection and Measurement segment offers underground pipe and cable locators, inspection and rehabilitation equipment, and robotic systems under the Radiodetection, Pearpoint, Schonstedt, Dielectric, Riser Bond, Cues, ULC Robotics, and Sensors & Software brands; transportation systems under the Genfare brand; communication technologies products under the TCI and ECS brands; and obstruction lighting products under the Flash Technology, ITL, Sabik Marine, Sealite, and Avlite brands. The company markets its products through independent manufacturing representatives, third-party distributors, and retailers, as well as direct to customers. The company was formerly known as SPX Corporation and changed its name to SPX Technologies, Inc. in August 2022. SPX Technologies, Inc. was founded in 1912 and is headquartered in Charlotte, North Carolina.

Allient Inc., together with its subsidiaries, designs, manufactures, and sells precision and specialty controlled motion components and systems for various industries in the United States, Canada, South America, Europe, and Asia-Pacific. It offers brush and brushless DC motors, brushless servo and torque motors, coreless DC motors, integrated brushless motor-drives, gearmotors, gearing, modular digital servo drives, motion controllers, optical encoders, active and passive filters, input/output modules, industrial communications gateways, light-weighting technologies, and other controlled motion-related products, as well as nano precision positioning systems, servo control systems, and digital servo amplifiers and drives. The company sells its products to end customers and original equipment manufacturers in vehicle, medical, aerospace and defense, and industrial markets through direct sales force, authorized manufacturers' representatives, and distributors. The company was formerly known as Allied Motion Technologies Inc. and changed its name to Allient Inc. in August 2023. Allient Inc. was incorporated in 1962 and is headquartered in Amherst, New York.